Do you know that, according to the United Nations, one in three people globally does not have access to safe drinking water? By 2025, half of the world’s population could face water scarcity. Therefore, water conservation is not our choice, It is our social responsibility.

Here are the 5 methods of water conservation technique that will be helpful to save water.

1. Fix leakage right away

A small drip of water can waste gallons of water over time. Every household faces these problems and neglects the situation, Ultimately we can’t realize how much water we waste.

Always check faucets, toilets flash, and pipes to find leakage. You can fix it yourself or get it fixed by a plumber. However, if you want to fix it yourself, you can follow the below instructions.

How to fix dripping faucets?

• • Firstly, locate the shut-off valves under the sink and shut the water flow, or you can shut the main water supply, and wait until it dries.

• • Depending on the faucets, you may need different types of tools to disassemble the faucets. Please be careful while removing inner components like stem, cartridge, or ball assembly.

TIP: If you are not aware of the setting of the place of the faucet’s internal component, you can click photos or make videos. So that, you don’t have to remember all the things. It will be easy to reassemble at the end.

• • Check all the components and inspect any damages. Most of the leakage is caused by worn-out washers, O-rings, or seals. Look for worn-out parts and replace them with new ones, don’t forget to take them with you to the shop while buying this component.

• • After changing the component, you can reassemble all the components carefully. Make sure to tighten the parts properly. If you find it difficult, you can refer to the photos or videos you took earlier to ensure correct assembly.

For a more detailed overview, this article can be really helpful to fix faucets.

How to check and fix a toilet flash?

Most leaks are caused by: 1. a damaged flapper, 2. a faulty fill valve, 3. a damaged flush handle, 4. a leaking toilet base, 5. a cracked tank, and 6. an overflow tube. Inspecting and replacing these parts can stop the leakage.

How to fix the leakage pipe?

Before fixing, your job is to find the all leakage of the pipe, If you want to fix it temporarily then you can use epoxy putty, tape, or any kind of metal or pipe putty. Epoxy putty can be used both for metal and plastic pipes. It has two components, mixed and applied on leakage.

2. Install Low flow fixture 

Installing low-flow fixtures is a good idea, Due to the fast-flow faucets and shower heads, we waste lots of water. Replacing with low-flow fixtures immensely helps to reduce water wastage without compromising.

3. Collect Rainwater in the barrel 

Collecting rainwater will be a good step towards conservation of water. This water can be used for gardening, washing cars, bikes, and other non-potable work. It will reduce dependence on municipal water, and You will save a lot of water at home and bill as well.

4.  Run Only full Appliances.

Running appliances like dishwashers and washing machines when fully loaded can save a lot of water. It is an efficient way to use all these appliances to reduce overall usage of water. By doing so, You will save your time and effort as well.

5. Water plant wisely

Always water the plant early in the morning and late in the evening, because this timing is perfect for watering because at this time water evaporates slowly and requires less water. This way, plants get enough time to absorb the water. I found this one a wise idea because most of us follow the wrong timing to water the plant.

By applying these 5 methods of water conservation, You can save enough water at home in the initial stage. However, If you want to know about the complete rainwater harvesting technique and cost. You can leave a comment below.